Request accessBook a demo

What is a tech pack? What goes in one, and why it matters

A tech pack is the document a factory makes a garment from. It holds the flat sketches, the bill of materials, the graded measurement chart, how each seam is made, and the labels and packing: everything needed to sample, cost and produce the style without guessing.

6 min read · Updated Garment manufacturingPlanning
A technical drawing of a shirt on a design table beside a measuring tape, a fabric swatch card and buttons

Myth or fact?

  • Myth: A tech pack is finished once the sketch is drawn.

    Fact: It grows through development. Fit comments change measurements, material approvals change the bill of materials, and the version the factory produces from is the one issued after the pre-production sample is approved.

  • Myth: The factory will work out the details.

    Fact: Whatever the tech pack leaves out is decided by someone else, often differently from what the designer intended. Costing, quality checks and delivery all depend on the details being written down.

  • Myth: Sending the latest file is enough.

    Fact: Copies drift. A tech pack needs a version number, a record of what changed, and the factory's acknowledgement of each change, or two sides end up working from different files.

1. What goes in a tech pack

Tech packs differ by company and product, but most hold the same parts.

  • Flat sketches, front and back, with callouts
  • Bill of materials: every fabric, trim and label, with colour by colourway
  • Measurement chart with points of measure, tolerances and grading
  • Construction: seams, stitches, stitches per inch, finishes
  • Artwork placements for prints and embroidery
  • Labels, packing and folding instructions

2. Measurements and grading

The measurement chart lists each point of measure, how to measure it, the base-size value and the tolerance. Grading rules turn the base size into every other size, so the chart covers the whole size range the order will be placed in.

A cutting table with many plies of striped shirting and a paper marker
The factory cuts, sews and checks every piece against the tech pack; anything left out is decided on the floor.

3. Construction and quality

Construction pages say how the garment is made: which seam joins which panels, the stitch type and density, and the finishing. Those details decide the operations and minutes, so they also decide the cost of making, and they are what inspectors check against.

4. Versions and sign-off

A style usually passes through a proto, fit samples and a pre-production sample, and the tech pack changes at each. Issuing it as a numbered version, with changes marked and acknowledged by the factory, keeps everyone on the same file until production.

The words, in plain terms

Tech pack
The garment's full specification, sent to the factory to sample, cost and produce from.
Bill of materials (BOM)
Every material in the garment, with quantities and colours.
Point of measure (POM)
A defined place to measure a garment, such as chest width or sleeve length.
Grading
The rules that turn the base size's measurements into every other size.
PP sample
Pre-production sample: the last approval before bulk production starts.

On WOVENN

CREATIX

Styles, samples and fit, the specification and numbered tech packs that factories acknowledge.

See CREATIX

Keep reading

Garment manufacturing · Wovens · Costing

How a woven garment factory really works

From fabric inspection and cutting to sewing lines, finishing and the final audit: how shirts and trousers are made, and three myths about factory speed.

7 min read · 3 myths bustedRead

Garment manufacturing · Knits · Fabric and mills

How knit garments are made, from yarn to t-shirt

Circular knitting, dyeing, compacting, cutting and overlock sewing: how t-shirts, polos and sweatshirts are made, and why shrinkage and GSM are misunderstood.

7 min read · 3 myths bustedRead

Denim · Garment manufacturing · Fabric and mills

How denim jeans are made: indigo, twill and the wash

Why indigo fades, what 3x1 twill and sanforizing mean, how jeans are sewn and washed, and the truth about stonewash, selvedge and raw denim.

8 min read · 3 myths bustedRead